Back to Blog
How-to Guides 2026-11-11 hope&plum 6 views

How to Use the Piper Ring Sling for Newborns

How to Use the Piper Ring Sling for Newborns

Learn how to safely use the Piper Ring Sling for your newborn, from choosing the right length to achieving a secure newborn fit. Step-by-step guidance for front and hip carries.

Getting Started with the Piper Ring Sling for Your Newborn

The Piper Ring Sling from hope&plum is a warm tan chambray carrier that adjusts by sliding fabric through the rings — no buckles or snaps. Designed for babies from 7 to 35 lbs, it supports front and hip carries, making it a practical choice from the newborn stage through toddlerhood. This guide walks you through safe newborn positioning, how to tie the sling, and how to adjust the fit for your baby's comfort and your peace of mind.

How to Tie the Piper Ring Sling for a Newborn

Before you begin, choose the right length. The Piper comes in Short (74"), Mid (84"), and Long (94") to fit almost any wearer. For most adults, the Mid length works well; taller or plus-size caregivers may prefer the Long. If you're between sizes, the shorter option often gives a cleaner tail adjustment.

  1. Thread the rings: Hold the rings in one hand. Take the tail end of the fabric and feed it through both rings, then back through the top ring only, creating a 'C' shape. Pull the fabric snug so the rings sit at your shoulder.
  2. Position the sling on your body: Slip the sling over your head and one arm so the fabric rests diagonally across your chest, with the rings at your front shoulder. The fabric should be spread flat across your back.
  3. Create the pouch for your newborn: Reach across your body and gather the fabric between your shoulder and the rings, pulling it outward to form a deep pouch. For a newborn, the pouch should be snug and high — the top edge should sit at about your collarbone level before baby is placed inside.
  4. Place your newborn in the sling: Support your baby's head and bottom as you guide them into the pouch, legs tucked in a froggy position (knees higher than bottom). The fabric should support from knee to knee, with baby's back gently curved and head visible and clear of fabric.
  5. Tighten the sling for a secure fit: Hold the top rail of the fabric near the rings with one hand. With the other hand, pull the tail through the rings to tighten. Work from the top rail down, tightening gradually. The sling should be snug enough that baby stays pressed against your chest without slumping.
  6. Check newborn positioning: Your newborn's face should be visible and above the fabric at all times. Their chin should not be pressed to their chest. The fabric should be spread evenly across their back, supporting the natural curve of their spine. For hip placement, the sling can be shifted to your side, with baby's hips in a supported squat position.

Piper Ring Sling Evidence for Newborn Use

  • Piper Ring Sling: It carries babies from 7 to 35 lbs, front and hip carry, the perfect carrier to take you from the newborn stage through toddlerhood. This confirms the Piper is suitable for newborns once they reach 7 lbs, covering the early months through toddlerhood without needing a separate carrier.
    Piper Ring Sling
    Piper Ring Sling
  • Piper Ring Sling: Made from 55% hemp and 45% organic cotton, with no synthetic fibers, just a breathable natural fiber construction that softens with every wash. Breathable natural fibers help prevent overheating, which is especially important for newborns who cannot regulate temperature as well as older babies.
  • Piper Ring Sling: Meets ASTM F2907 safety standards for sling carriers. Compliance with ASTM safety standards gives you confidence that the carrier has been tested for safe use, including for newborns when used according to instructions.
  • Piper Ring Sling: It comes in three lengths: Short (74"), Mid (84"), and Long (94"), so there's a fit for almost any wearer. Choosing the correct length is essential for achieving a snug newborn fit — a sling that is too long or too short cannot be adjusted properly.

Newborn Safety Checks for Ring Sling Positioning

Before each use, ensure the sling is properly tightened so your newborn stays high and close enough to kiss. The fabric should be spread evenly from knee to knee, supporting baby's hips in a natural squat position. Never let fabric bunch around baby's face. The rings are made from anodized aluminum — smooth and strong — and should be positioned at your shoulder, not on your back or under your arm. Always use the sling on your front or hip; back carries are not recommended for newborns with this type of carrier.

Adjusting the Piper Ring Sling as Your Baby Grows

The Piper Ring Sling's adjustable design means the same carrier can adapt as your newborn becomes a toddler. As your baby gains head control and trunk strength, you can gradually loosen the fabric to allow more leg extension. The natural hemp and organic cotton fabric softens with each wash, which can actually improve the fit over time. For toddlers, the hip carry becomes especially convenient for quick ups and downs during errands.

Related Articles

Customer Service
Home
Products
Cart
Profile